Learning & Exploring

Reclaimed branch art. Mixed species glued to Walnut stained Pine board. This piece took patience and perseverance and was harder to do than I thought! ~10”x24”. 

Reclaimed Oak balusters. Love how this turned out! ~1.5” cubes cut at 15, 30, and 45 degree angles. Finished with oil, glued to Walnut stained Pine board. ~20”x10”. 

Reclaimed wood Canada flag. Oak strips with Walnut stain and oil finish. ~18”x36”. Inspired by a flag my Dad made.

Mahogany guitar pick box. Clear plastic cover inset into box as a permanent lid. Slit in wood at back allows for pick insert and shake out. 

Carved this stamp using scrap vinyl tile.  Multiple bits used 1/8" for roughing, then 10 degree detail v-bit.

Ipe & Stainless steel ring.  Cut Ipe wood on CNC, then glued to stainless steel band.  Lots of trial and error with this one.